On a hot summer day the water in a little state pool is heated obviously. After the weather is overcast heating time is extended or, generally speaking, the temperature doesn’t achieve a comfortable temperature of +22oC. In large pools organic heating takes even longer. To solve this problem, made a heater to the pool, working out of different energy sources.

Heat exchanger

The simplest water heater for your swimming pool is an heat exchanger. The basis of this design is really a tank, through which the warm liquid flows. It is connected to the heating system or some other heating water heater. Within the tank is a built-in coil. This part is that the heat exchanger. Pool water slides through the coil, heating from the hot liquid in the tank.

Why do you want such a complicated pool heater if you’re able to just run on the water directly throughout the heater? You can use this type of strategy, but there are just two problems:

When warmed, they settle on the walls of this heat exchanger as a solid sludge, clogging it.

To expensive boiler or leak heater doesn’t neglect, the heating system is equipped with a second loop. The heat exchanger is simpler and cheaper to change if it gets clogged or flows from oxidation of their walls.

In a little children’s pool piping has been set to the principle of the machine»underfloor heating». A little bit of water the coil will warm quickly, and using a large volume won’t cope. Electric models

The remonttool.ru second most popular is an electric heater for your pool, composed of a body, heating components and a thermostat. Devices come in two types:

• Accumulation. The system consists of a large tank, in which the water is warmed from the heating elements, and from there it’s fed to the pool. The device is linked to the water treatment program of this pool. There is a filter in front of the water heater, which moves purified water, which eliminates the formation of strong deposits.
• Based on the capacity, the devices are linked to single-phase and three-phase networks.

The need to heat a massive quantity of water demands the use of strong devices. Electricity prices are huge, and you want to put another field of wiring. Heating pump

Rather complicated in the unit of this heater for the pool heat pump identifies innovative technology. The unit is efficient and cost-effective, however it is rarely used because of its high cost.

Significant: The heat pump operates to the principle of their fridge, just here the circuit which releases heat, not cold, is in demand.

The machine consists of 2 circuits, inside which the fluid circulates. The outer pipe can be laid underground, at the base of the window or alternative location where you are able to extract heat. The inner circuit is put in the pool. It offers the water that the heat extracted from the outer pipe.